EPD Expiry Watch: Three Wattstopper EPDs in January

What’s expiring and when

As of May 20, 2026, Legrand North and Central America has three Wattstopper controls with EPDs that show January 2027 validity end dates:

• Wattstopper Digital Light Management Room Controller with 0–10V dimming, expiring 2027‑01‑26.
• Wattstopper Passive Infrared Fixture‑Integrated Outdoor Sensor, expiring 2027‑01‑25.
• Wattstopper Low‑Voltage Dual‑Technology Occupancy Sensor, expiring 2027‑01‑25.

These declarations are published under the PEP ecopassport program for electrical and electronic equipment.

Are replacements already live?

We looked for newer PEPs covering the same product families on Legrand’s public asset library and the PEP registry. As of May 20, 2026, we did not find a newer, longer‑dated declaration for these exact models beyond the January 2027 window. Legrand’s product pages do link to PEPs for the same families, which is good hygiene, but none extend validity past late January 2027 yet:

• Digital Light Management Room Controller product page lists a Product Environmental Profile link that currently resolves to a PEP for the LMRC‑21x family.
• Low‑Voltage Dual‑Technology Occupancy Sensor family page likewise links to a PEP covering DT‑/CI‑/UT‑300 and ‑305 variants.
• Fixture‑integrated outdoor sensors have PEPs posted for common FSP‑2xx variants.

You can monitor Legrand’s sustainability hub and EPD iconography for fresh postings: High‑Performance Buildings hub and Eco‑Iconography key on legrand.us. Legrand’s general environment page also centralizes updates and policy signals.

• Legrand sustainability hub: https://www.legrand.us/about-us/sustainability/high-performance-buildings
• Eco‑Iconography key: https://www.legrand.us/about-us/sustainability/high-performance-buildings/eco-iconography
• Environment overview: https://www.legrand.us/about-us/sustainability/environment

What this means for specs

Controls without current, product‑specific EPDs are still viable in many projects, but owners and design teams increasingly use EPD presence as a tie‑breaker when alternatives are near‑equal on performance and price. On projects that require product EPDs in submittals, a lapsed declaration can trigger substitution to a comparable control with an active PEP ecopassport. That swap often happens late in procurement, which adds friction and can strand channel inventory.

Likely alternatives if renewals slip

If the three Wattstopper EPDs are not refreshed before January 2027, specifiers are likely to consider the following in the same functional lanes and with active program‑operator listings:

• Schneider Electric presence and occupancy detectors published under PEP ecopassport, which cover common PIR and dual‑tech use cases in commercial interiors. See Schneider’s recent PEP postings catalogue for controls and sensors families.
• ABB motion and presence sensors with current PEPs that align to the same PCR family and are positioned for building automation use.
• Hager presence detectors with PEP coverage in the same sensor category, commonly used in commercial interiors.

Because model‑level coverage, scope, and dates vary by brand and series, teams should verify the exact PEP number and validity window at submittal. When controls are integrated into luminaires, luminaire EPDs can also satisfy the EPD ask for the lighting package in some projects, which is why many specifiers keep sensor‑equipped panels and troffers with active EPDs in their back pocket.

Commercial impact in plain terms

Renewals keep sales momentum. A current EPD avoids eleventh‑hour substitutions, protects margin, and reduces compliance back‑and‑forth with GC and owner reps. Conversely, a short gap can push a project toward a competitor with an active declaration even if the control spec started in your favor. That trade rarely comes back later in the job.

Renewal runway and timing cues

PEP ecopassport EPDs are typically valid for five years. With end dates landing January 25 to 26, 2027, the renewal runway is about eight months. Building a cushion matters because verifiers and operators see seasonal surges. A crisp plan usually looks like this:

• Confirm exact model coverage and bill‑of‑materials now so the replacement EPD can stay product‑specific rather than falling back to generic claims.
• Refresh the use‑phase assumptions that drive most impacts for active electronics, then lock references for energy mix and firmware states.
• Pre‑stage document control on marketing pages so the new PDF replaces the old one everywhere specifiers click.

Where to watch for updates

• Legrand’s High‑Performance Buildings page aggregates EPDs by product family and flags them with an EPD icon.
• The PEP ecopassport public registry lists new issues and renewals; controls families sit under electrical and electronic equipment.
• Some products also appear on EPD Directory listings that collate operator‑hosted PDFs for quick project lookups: https://epd.directory

Bottom line for specifiers

If these three Wattstopper EPDs renew on time, continuity is preserved and no action is needed in Q1 submittals. If they slip, teams that must show current EPDs for controls will likely pivot to brands with active PEPs in equivalent sensor and room‑controller families. Either way, marking January 2027 on the calendar is smart so bids don’t get snagged by a paperwork gap that is easy to avoid.

A quick data note

For electronics and controls, the use phase typically dominates most impact categories in PEPs for active products, which is consistent with published operator datasets for sensors and low‑power controllers in 2025–2026 program updates (PEP ecopassport, 2025). If your control strategy cuts standby draw or sensor wattage, the EPD will reflect it. That’s why a tidy load profile and accurate duty cycle make a measurable difference.

P.S. If you publish a renewal, remember to update the product pages and submittal kits the same week. One stale PDF in a distributor portal can undo days of careful work. It’s annoying, but true.