EPDs for Resilient Flooring in Europe, the data guide
Here is the 2026 state of play for resilient flooring EPDs in Europe. Think vinyl flooring, LVT, linoleum and rubber. We analyzed 153 current declarations from the past five years to show who is publishing, which program operators and PCRs dominate, and when expiries will hit so you can plan production and marketing with confidence.
What counts as resilient flooring, and why it matters
Resilient flooring includes vinyl sheet and tile, luxury vinyl tile, linoleum, and rubber surfaces used across healthcare, education, retail, sport and transport. If your spec requires a product‑specific EPD, having one keeps your brand in play rather than forcing buyers to apply generic penalties that quietly push choices elsewhere.
The five year snapshot
Across Europe we see 153 current EPDs from 33 manufacturers and 7 program operators, spanning 21 distinct PCRs. The latest release within the window is Kährs “Quartz,” published on May 25, 2025 through EPD Hub under the EPD International AB c‑PCR for resilient, textile and laminate floor coverings, expiring May 25, 2030.
EPDs issued per year
| Year | EPDs issued |
|---|---|
| 2021 | 19 |
| 2022 | 57 |
| 2023 | 45 |
| 2024 | 28 |
| 2025 | 4 |
2022 was the surge year, followed by steady throughput in 2023 and a slower 2024. The 2025 count is expectedly low in public registries at the time of writing because late year postings often lag.
Program operators in use, and how broad their adoption is
A quick read on operator choice tells you where peers publish, and where reviewers already know your product type.
INIES leads with 54 EPDs used by 10 manufacturers, reflecting the strength of French NF EN 15804 national additions. EPD International AB follows with 35 EPDs across 9 manufacturers. UL is next with 29 across 7 manufacturers. IBU registers 20 across 7, ICMQ SpA 8 across 2, EPD Hub 5 across 2, and EPD Italy 1 from 1 manufacturer. A single declaration shows no operator listed.
This mix signals real diversity. INIES is not just one brand pumping out dozens, it is ten different manufacturers. UL and EPD International AB show cross border appeal for resilient flooring, useful if you sell into multiple markets.
Manufacturers shaping the category
Naming in public records can fragment groups, so read the following as directional.
Gerflor and related entities account for a large share, with GERFLOR listed for 39 EPDs, Gerflor for 3, and Gerflor USA for 18 within the European resilient category window. Nora shows 11, MONDO SpA 10, Interfloor Limited 9, Intrasystems 9, Sika Hellas ABEE 7, Valsir S.p.A. 7, Artigo 5, POLYMAXITALIA 4, ARTEPY 4, plus many with one to three declarations. James Halstead PLC appears and so does Kährs, Bolon, Amorim, IVC Group, and others.
Big global names that often come up in searches are very present. Forbo and Tarkett both have current resilient flooring EPDs, as do Interface and Altro. No obvious household name is missing in action for resilient flooring today.
Win A $50 Amazon Gift Card in One Click!
Enter weekly raffle in one click • Help us get to know our readers and improve!
PCRs manufacturers actually use
Think of PCRs as the rulebook of Monopoly, ignore them and the game falls apart. Here is what is in play for resilient flooring across Europe.
| PCR | EPDs | Latest expiry |
|---|---|---|
| CEN standard EN 15804 | 7 | Apr 7, 2027 |
| EN 16810:2017 Resilient, textile and laminate floor coverings, EPD PCR | 4 | Mar 1, 2029 |
| EPD Hub Core PCR v1.0, Feb 1, 2022 | 2 | Jul 8, 2028 |
| EPD Hub Core PCR v1.1, Dec 5, 2023 | 2 | Jan 9, 2030 |
| EPD International AB c‑PCR Resilient, textile and laminate floor coverings (EN 16810:2017), v2024‑04‑30 | 1 | May 25, 2030 |
| PCR 2012:01 Construction products and services (EN 15804 A1) | 1 | Mar 18, 2026 |
| PCR 2019:14 Construction products (EN 15804 A2) v1.3.3 | 4 | Nov 6, 2027 |
| PCR 2019:14 Construction products (EN 15804 A2) | 2 | May 19, 2026 |
| PCR 2019:14‑c‑PCR‑004 Resilient, textile and laminate floor coverings (EN 16810) | 20 | Jun 4, 2030 |
| PCR 2019:14‑c‑PCR‑017 Technical‑chemical products for construction | 7 | Jan 9, 2029 |
| PCR for Construction products ICMQ‑001/15 rev 2 | 2 | Jan 31, 2027 |
| Part B, EPD requirements for floor coverings | 3 | Feb 25, 2030 |
| Part B, Flooring | 22 | Oct 30, 2029 |
| Part B, Requirements on the EPD for Floor Coverings | 3 | Feb 14, 2027 |
| Part B, Requirements on the EPD for Floor coverings | 8 | Aug 1, 2028 |
| NF EN 15804 A1 national addition (France) | 31 | Oct 31, 2027 |
| NF EN 15804 A2 national addition (France) | 23 | Jul 31, 2029 |
| Teil B, Anforderungen an die EPD für Bodenbeläge | 2 | Feb 15, 2027 |
| Unknown PCR | 8 | Dec 5, 2029 |
| c‑PCR‑004 Resilient, textile and laminate floor coverings (EN 16810) | 1 | Jan 18, 2029 |
Two practical takeaways. First, the French national additions account for 54 EPDs combined, which makes them a natural anchor if France is a key market. Second, several newer templates already reach into 2030, useful if you want a longer runway before your next refresh.
Expiry outlook through 2030
EPDs are typically valid for five years, so renewal calendars matter for sales planning and internal data gathering (EPD International, 2024).
- 2026 shows 18 expiries, with NF EN 15804 A1 national additions driving most of the volume.
- 2027 is the steepest year with 57 expiries across multiple PCRs, including 22 on NF EN 15804 A1 national addition and 17 on “Part B, Flooring.”
- 2028 counts 42 expiries, heavily on c‑PCR‑004 and French A2 national addition.
- 2029 has 30 expiries, a mix of EN 16810, c‑PCR‑017 and French A2.
- 2030 drops to 5 expiries, including EPD Hub Core PCR v1.1 and the EPD International AB c‑PCR v2024‑04‑30.
If your hero SKU lands in the 2027 wave, start readiness now. The project that waits for a last minute refresh usually waits longer on the bid list.
Most declarations are created with an EPD service provider
Out of 153 current EPDs, 98 were produced with an external EPD consultant or service provider, roughly 64 percent. That aligns with what we see in practice, resilient flooring has complex supply chains and multiple factories. If resourcing is tight or data lives in many systems, partnering with an expert EPD service provider like Parq keeps internal teams focused while still shipping a defensible declaration quickly.
Operator choice, simplified
Choosing where to publish is both strategic and practical. INIES is a natural pick for France and French‑speaking markets. EPD International AB and UL are widely recognized across Europe. IBU is a frequent European choice for manufacturers with strong German market exposure. What matters most is speed to publish, reviewer familiarity with your PCR, and support for future updates.
PCR selection playbook for resilient flooring
Pick what competitors use unless there is a clear reason not to, then look at expiry runway. A good fit in 2026 often means one of the following, depending on your markets and product specifics.
- French NF EN 15804 A2 national addition if France is material to revenue and you need local acceptance.
- “Part B, Flooring” and related Part B documents if your portfolio spans multiple resilient subtypes.
- EPD International AB c‑PCR for EN 16810 products if you want a template already stretching into 2030.
Teh best choice also depends on factory locations, energy mixes, and product sub‑families, which a strong EPD consultant will evaluate with you.
The latest EPD in this dataset window
Kährs “Quartz” was issued May 25, 2025 with EPD Hub as operator, using the EPD International AB c‑PCR for EN 16810 products, and it is valid to May 25, 2030. That is a helpful marker for anyone eyeing the same PCR family in 2026.
Turning this data into wins
If resilient flooring is on a spec that requires a product‑specific EPD, having one reduces risk for the design team and shortens back‑and‑forth during carbon accounting. With LEED v5 activity and public owner preferences continuing to favor transparently reported products, declarations are now a baseline qualifier rather than a nice‑to‑have. The cost of an EPD is frequently recouped with a single mid sized project when it keeps your product in contention.
One last thing
This article uses the global public registry that most architects and specifiers rely on. Because of posting delays, some EPDs from the second half of 2025 may still be missing at publication time. If you want the full up to date background dataset, connect with me on LinkedIn and send a note. I am happy to share the extract, answer questions, and hop on a quick call to help choose the best fit PCR for upcoming EPDs based on the competitive landscape.
Frequently Asked Questions
What is the dominant program operator for resilient flooring EPDs in Europe in the last five years?
INIES leads with 54 current EPDs across 10 manufacturers, followed by EPD International AB with 35 across 9 and UL with 29 across 7.
Which PCRs are most commonly used for resilient flooring in Europe?
The French NF EN 15804 national additions account for 54 combined EPDs, “Part B, Flooring” records 22, and c‑PCR‑004 for EN 16810 products shows 20. Several newer references now extend to 2030.
How many resilient flooring EPDs were created with an external EPD consultant or service provider?
98 of 153 current declarations, roughly 64 percent, indicate involvement of an external EPD consultant or service provider.
When will the largest expiry wave arrive for resilient flooring EPDs?
2027 has the largest wave with 57 expiries, followed by 42 in 2028 and 30 in 2029.
What is the most recent resilient flooring EPD in the dataset window?
Kährs “Quartz,” issued May 25, 2025 by EPD Hub using EPD International AB’s c‑PCR for EN 16810 products, expiring May 25, 2030.
About the Author
With a passion for sustainability and a love for complex data, Toby helps manufacturers efficiently collect data from across their organization and get their EPDs done right. He’s especially interested in how AI can support human expertise, helping R&D and factory teams work faster, smarter, and with less friction.
